Forums » News and Announcements

Lotion Pump Pump Head Knowledge Sharing Lotion Pump Head Tips

    • 11 posts
    June 14, 2019 11:34 PM PDT

    1. The distributor is divided into two types: tie type and screw type. From the point of view of function, it is divided into spray, foundation cream, emulsion pump head, aerosol valve and vacuum bottle.

    2, the size of the pump head is generally matched with the diameter of the bottle, the standard of spray is 12.5mm - 24mm, the water output is 0.1ml / time - 0.2ml / time, generally used in perfume, gel water and other commodity packaging, caliber The length of the same reception can be determined according to the height of the bottle.

    3. The standard size of the emulsion pump head is 16ml to 38ml, and the water output is 0.28ml/time - 3.1ml/time. It is generally used for creams and scrubbing products.

    4, special dispensers such as foam pump head and hand-held nozzle, foam pump head is a non-injected hand pump head, no need to infuse to generate foam, just a light press can produce quantitative high quality foam . Usually equipped with a special bottle. Hand-held sprinklers are generally used on products such as detergents.

    5, the composition of the dispenser is rather messy, generally includes: dust cover, hoe, mast, gasket, piston, spring, valve, cap, pump body, straw, valve ball (with steel ball, glass ball) . The cap and dust cover can be colored, electroplated, and can be set with an electric aluminum ring. Because a set of pump head involves more molds, and the order quantity is larger, the order quantity is 10,000-20,000.

    6, vacuum bottles are generally cylindrical, standard 15ml - 50ml, a single 100ml, the overall capacity is small, relying on the principle of atmospheric pressure, can prevent cosmetics from forming pollution during use, vacuum bottles with electrochemical aluminum, plastic plating and colored Plastics, the price is more expensive than other general containers, the general order quantity is not high.

    7, the dispenser customers rarely open their own molds, the molds required to pay more, the cost is higher.

    The   Lotion Pump      is suitable for: hand sanitizer, ointment, etc.; each pumping volume is 1.0CC and 2.0CC; you can press it only 3-4 times; the left and right rotation can open or close the pump head. Easy to use; sealed design, leakproof; spring corrosion resistance; travel using this pump head product, convenient, worry-free

     https://www.china-xingsheng.net/product/lotion-pump