Forums » Suggestions

Led Lights, Which Decorative Purposes?

    • 23 posts
    April 18, 2019 9:54 PM PDT

    Led Decorative Light Manufacturer - Led Lights, Which Decorative Purposes?

     

     

    LED is very suitable for decorative purposes because of its rich color, small size, durability and energy saving. Mount it on a circuit board or on a flexible cable or other material. LEDs can be used as light sources for letter lights, signage, track lights, tubes, and the like.

      

    Because of its rich color, small size, durability and energy saving, LED is very suitable for decorative purposes.

      

    LED Decorative Light Manufacturer    explained: LED decorative lights installed on the circuit board or flexible cable or other materials, LED can be used as a light source for letters, signs, track lights, lamps, etc. Lighting With the development of LED technology, a combined LED is installed in a certain way, it can emit enough light for indoor lighting, for example, it can be used as a typical use of display LEDs such as night lights, table lamps, garden lights, etc. It is used for information display and large screen display, and they are widely used in stadiums, airports, commercial centers, and so on. The world's largest LED display is currently in Times Square, Manhattan, New York. LED backlights are very suitable as backlights for liquid crystal displays because of their small size and low power consumption. Color Singleness of color is an intrinsic feature of LEDs that emits a very pure color over a very narrow frequency, which is calculated using wavelength (LPK) (NM). Wavelength is an intrinsic property of LED wafer materials. Different materials have different wavelengths, that is, different colors. We know that white light is a comprehensive combination of all colors, but people's eyes do not need the synthesis of all colors in the spectrum, only three colors (red, green, blue). Based on this principle, people have thought of many ways to make white LEDs. The most typical manufacturing method is to bury the zinc-type blue LED in a yellow-emitting phosphor.

     

    https://www.nhhx.net/